Canon M-1 PRO V Cable ID Printer

Product Description:

• Amazingly fast, easy and clear! Bringing tremendous improvement in work efficiency! The prints precise characters of up to 300dpi for tubes, labels and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish. Character sizes: 2, 3, 6mm
• Print speed (tubes): up to 240cm per minute
• Standard output rate 42pcs./min.* 
• *20mm tube, 5 full-size characters, consecutive print mode, fast cutting

Printing up to trailing edge of tube The MK series printers can print characters up to the edge of each tube to avoid tube waste. This contributes to long-term cost reduction.

Automatic cutting / full-cut is also possible Each segment is partially cut automatically as it prints. The segments are easily separated manually after they come out of the printer. The cutting operation for each job can be set for full-cut, half-cut, no cut with marking, or no cut without marking.

Consecutive / serial printing MK series printers can be set to print the same text on every segment (consecutive printing). Just enter the data and the number of segments required, then start the print. Or, MK series printer can be set to print numbers that increment automatically as the segments print (serial printing). No need to do separate entries and printing for each segment!

Specifications 

Printing Method:

Thermal transfer

Resolution:

300dpi

Printing Speed

Tubes:

High speed: 40mm/sec.

Middle speed: 25mm/sec.

Low speed: 18.5mm/sec.

Labels:

High speed: 40mm/secs.

Middle / Low speed: 25mm/secs.

Output Rate:

High speed: About 42pcs./min.

Middle speed: About 35pcs./min.

Low speed: About 30pcs./min.

Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.

Ink Ribbons (Exclusive cassette):

Black:100m

White:85m

Black for Marking Strip:40m

Character Sizes:

1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each)

Input Modes:

Alphanumeric, symbol input

Display:

LCD Graphic (160 x 64 dots)

Display Capacity:

10 characters/line x 2 lines (full-width) or 

20 characters/line x 2 lines (half-width) (3 lines editing is possible.)

Built-in Memory:

Print-data: Approx. 5.000 characters

Files: Approx. 60,000 characters,10Folders(Each can save upto99 files)

Service life of internal backup battery for data storage: About 5 years

Media Cutting Method:

Automatic full-cutting, Automatic half-cutting

Power Supply:

Exclusive AC Adapter

Input voltage: AC 100V - 240V 50 / 60Hz

PC Interface:

USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)

Operating Environment:

15°C - 32.5°C (59°F - 90.5°F), 

10% - 85% RH 

Range is lowered to 5°C (41°F) with Tube Warmer option installed

Storage Environment:

5°C - 35°C (41°F - 95°F), 

10% - 90% RH

Dimensions (W x D x H):

250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)

Weight:

2kg (4.4lb.) (printer only)

Tube

PVC tube, φ 2.5 - 6.5mm, 0.5mm thick 

Tube attachment option is required (Other tubes should be tested for printing.)

Label Tape (Exclusive cassettes (White, Yellow, Silver)):

Width:6mm, 9mm, 12mm

Length:30m (Silver: 27m) 

Segment length can be set to 2mm through 150mm

Wrap Around Tape: Exclusive cassettes:

Print area only: White

Other areas: Transparent

Take-up length:8m

Length:33mm

Width:6 - 150mm (depends on cut setting)

Marking Strip Specified thickness 0.5mm

Plates of other thickness should be tested for printing

Width:8mm, 8.5mm, 9mm, 9.5mm, 10mm

Plate Attachment option is required

Exclusive ribbon cassette is required

Manual cut only

Heat Shrink Tube:

Shrink tube:φ 3.0 - 6.4mm

Tube attachment option is required. 

(Other tubes should be tested for printing.)

4mm ID Strip (Exclusive Cassette (White, Yellow)):

Width:4mm

Length:5m

Segment length can be set to 8mm through 150mm